.jpg){kind=small}
RHTC PROFILE BENDERS
PROFILE BENDERS
RHTC Profi Bend Ex Stock
Made in Europe | CE
If you want to bend profiles or pipe material, the profile bending machine from Profi Bend is your best choice!
With RHTC's range of profile bending machines you can bend a huge variety of different profiles in almost any desired radius. Manufactured in Europe these machines are equipped with a lot of features to make your bending job easy.
All roll benders can be used in a vertical as well as a horizontal working position.
Equipped with 3 driven rolls and it is easy to switch between working with 2 driven rolls or 3 driven rolls. The adjustment of the position of the upper roll is very easy:
The PB40-3 and PB50-3 have a hand wheel for manual adjustment. The PB50-3H has an hydraulic adjustment by means of the hand pump. The H stands for hydraulic.
The Profi Bend machines can also be delivered with several optional accessories, such as different kinds of roller sets (from 1/4 inch to 2 inch) in several types of steel and plastic. These roll benders can also be provided with distance rollers, a yoke and a spiral bending device.
PROFILE BENDERS - AVAILABLE MODELS
PB 40-3
Manual adjustment of the upper roll and with a shaft diameter of 40 mm.
PB 50-3
Manual adjustment of the upper roll and with a shaft diameter of 50 mm.
PB 50-3HM
Hydraulic adjustment of the upper roll and with a shaft diameter of 50 mm.
Technical Specifications
-
Shaft diameter [mm]: 40
-
Roll diameter [mm]: 150
-
Rotational speed of rollers [rpm]: 13
-
Voltage [v/Hz]: 400/50
-
Driving motor [kW]: 1.5
-
Adjusting way [mm]: 140
-
Weight [kg]: 250
-
Total length [mm]: 870
-
Total width [mm]: 800
-
Overall height [mm]: 1350
Features of the PB 40-3
-
Manual adj. of the upper roll w/t hand wheel
-
Vertical and horizontal working position
-
Three driven rolls
-
Delivered with standard set of rollers
-
Foot pedal
Optional Accessories
-
Special sets of rollers (steel or plastic)
-
Spiral bending device
-
Yoke
-
Distance rollers
Technical Specifications
-
Shaft diameter [mm]: 50
-
Roll diameter [mm]: 155
-
Rotational speed of rollers [rpm]: 11
-
Voltage [v/Hz]: 400/50
-
Driving motor [kW]: 1.5
-
Adjusting way [mm]: 160
-
Weight [kg]: 355
-
Total length [mm]: 1100
-
Total width [mm]: 800
-
Overall height [mm]: 1400
Features of the PB 50-3
-
Manual adj. of the upper roll w/t hand wheel
-
Vertical and horizontal working position
-
Three driven rolls
-
Delivered with standard set of rollers
-
Foot pedal
Optional Accessories
-
Special sets of rollers (steel or plastic)
-
Spiral bending device
-
Yoke
-
Distance rollers
Technical Specifications
-
Shaft diameter [mm]: 50
-
Roll diameter [mm]: 155
-
Rotational speed of rollers [rpm]: 11
-
Voltage [v/Hz]: 400/50
-
Driving motor [kW]: 1.5
-
Adjusting way [mm]: 160
-
Weight [kg]: 430
-
Total length [mm]: 1200
-
Total width [mm]: 800
-
Overall height [mm]: 1750
Features of the PB 50-3HM
-
Hydraulic / motorized adj. of the upper roll
-
Digital read-out of the position of the top roll
-
Vertical and horizontal working position
-
Three driven rolls
-
Delivered with standard set of rollers
-
Foot pedal
Optional Accessories
-
Special sets of rollers (steel or plastic)
-
Spiral bending device
-
Yoke
-
Distance rollers
Standard set of rollers for bending different profiles
A standard set of rollers is included for bending profiles and flat bars. However, we can also deliver roller sets for bending tubes and pipes as an option with this bending machine. Further optional accessories are distance rollers, a yoke and a spiral bending device. Profi Bend machines are provided with storage compartments for its accessories as well.
RHTC Profi Bend profile bending machines are robust and reliable. They are manufactured with high quality materials and they fulfil the CE-directives.
